 | troy lehto on HFE Cells in Use |
 | bill moore on Catalysts |
 | Nitin on Catalysts |
 | j madigan on Featured HFE Cell Type |
 | Jim on Catalysts |
 | Mel Green on Catalysts |
 | andie on Catalysts |
| Mel Green on Catalysts |
 | Mike R on Catalysts |
 | Jacques Doyen on Measuring plate area |
To insulate a plate or plates from a combination structural bolt and electric connection, the prefered way is probably Nylon bushings, but these never seem to the length or OD that I want to use, so I have resorted to using pvc tubing that just fits over the bolt and cut to the length I [...]
Filed under: Parts Scrounger | Tagged: cpvc, electric connection, epoxy, insulate, nylon, nylon washers, pvc, shrink tubing, silicon, ss nuts, vinyl tubing | Leave a Comment »
I’ve noticed there are some clear plastic HFE containers on youtube and other sites, so I checked on some and the cost & availability. I found one aquarium supply house that has most of the supplies that can be used, tubing, check valves, connectors, glue, etc. Aquatic Eco-Systems
I have no affiliation with Aquatic Eco-Systems [...]
Filed under: Container, Parts Scrounger | Tagged: clear container, Container, cpvc, heat, hfe cell, lexan, polycarbonate, pvc | 1 Comment »
CPVC and PVC pipe and fittings can be found at almost any plumbing or building supplier in sizes from 1/2″ to 4″ diameter and in 8 to 10′ lengths. Be aware that PVC doesn’t hold up to as high a heat as CPVC.
I have found that the glues used to ‘cement’ them together should be [...]
Filed under: Container, Parts Scrounger | Tagged: Container, cpvc, pvc | Leave a Comment »
