 | bill moore on Catalysts |
 | Nitin on Catalysts |
 | j madigan on Featured HFE Cell Type |
 | Jim on Catalysts |
 | Mel Green on Catalysts |
 | andie on Catalysts |
| Mel Green on Catalysts |
 | Mike R on Catalysts |
 | Jacques Doyen on Measuring plate area |
 | JaK on Neutral plate test |
My results this weekend were mixed to say the best, and here’s what I found.
The 14 h.p. B&S vanguard motor at full throttle, (normal mowing speed), 3600 rpm, used 1 oz of gas per minute average. The test was run 4 times, using a baby bottle with a measured 4 oz of gas, the motor [...]
Filed under: Output testing | Tagged: hfe cell, Output testing, small engine, small engine test | Leave a Comment »
One of the most common ways to test output, while not real accurate, is to find two bottles that will fit into each other and slide easily. Cut the top off the larger one, and the bottom off the smaller leaving the cap side intact. Cut or drill a hole to insert your tubing into [...]
Filed under: Output testing | Tagged: flow meter, hho, HHO gas, HHO volume, measuring, output, Output testing, volume, weigh water, weight of HHO | 7 Comments »
