Continuing fine tuning on HFE dry cell

Changed tubing to smaller liquid inlet and larger gas out let in an attempt to control direction of liquid flow, my check valve decided not to work, they wouldn’t open, I guess plastic air valves don’t like NAOH.
Anyway, the flow rate didn’t change stayed at 200ml/min, up’ d the Solution from 5tsp/L to 7 in [...]

Typical HFE Cell wiring

Here’s a little help with the electrical wiring for a HFE Cell.
The Theme here is safety! Use appropriate sized wire, the packages will tell what amps it will carry, and you can look it up with a net search to be sure. Always go heavier if in doubt, a burned wiring harness, or even car [...]

Build a cell for a car Safety Hint

Just a quick note on building a HHO Fuel cell for your automobile safely!
I have noticed many people using power supplies with voltage and amperage controls, all fine and good for quick testing, and maybe certain testing, but take note of these facts:
An automotive electrical system is considered 12v and the voltage available ranges from [...]

Control the amps

Controlling the amps has many variables, the most effective is probably the catalyst, adjust the concentration to the amp range you are shooting for.
Try adding Neutral plates, one at a time, these also are claimed to reduce heat produced. Some claim they reduce output, some claim they increase output. Try it yourself and decide.
Pulse modulation [...]

HHO Fuel begins!

Here at HHO Fuel our goal is to promote the production of HHO Fuel.
If you post about an cell type, give details for construction, operational parameters (Volts, amps, pressure, etc), HHO production (l/m,cuft/m,etc)
Lets help each other do this right, if you add a neutral plate to an existing cell type, let us know what happened, [...]